Aluminum Profiles With Different Surface Processing Ways Powder
|Product||Aluminum Profiles With Different Surface Processing Ways Powder
|Material||Alloy 6060, 6061, 6063, etc.|
|Color||Different colors available (black, blue, green, champagne, bronze,
golden, vermillion, etc.)|
|Surface treatment||Mill finish, anodized, electrophoretic coating, powder coating,
thermal break, wood grain/wood-in-shift, etc.|
|Mould||Based on your drawing or use our mould free|
|Sample time||Usual practice: within 15 working days against payment|
|Usages||Windows, doors, curtain wall, solar panel, LED panel, heat sink,
|Certified||ISO9001-2008 Quality System,|
The preservation and use of powder coating:
1, away from fire, prevent sun direct illuminate, should be placed
in a well ventilated, temperature under 35 ℃.
2.Avoid places where they are contaminated with water, organic
solvents, oil and other materials.
3.The powder coating should not be exposed to the air at will,
should be added to the bag at any time and avoid the clutter.
4.Avoid long-term skin contact, adhere to the powder of the skin to
rinse clean, do not use the solvent.
Coating construction site safety:
1. The equipment should be used to remove static electricity.
2. Avoid the application of unendable discharge
3. The concentration of dust particles in the spray room is kept
below the safe concentration to avoid the danger of the dust
Properties of powder coating:
Powder coating is a new type of non-solvent 100% solid powder
coating. It has two kinds: thermoplastic powder and thermosetting
powder coating. The coating is made of special resin, dressing,
curing agent and other auxiliary agent, which is mixed with a
certain proportion, and is prepared by the process of heat
extrusion and crushing. Them at room temperature, storage
stability, the electrostatic spraying or fluidized bed dip coating,
reheat continuous curing, the formation of smooth and shining
permanent coating, to achieve the purpose of decoration and
1, this product contains no toxicity and contains no solvents and
excluding volatile toxic substances, therefore, no toxicity, no
fire, no pollution problems such as "three wastes" emissions,
completely conform to the requirements of national environmental
2. High raw material utilization, the powder can be recycled, the
utilization rate is more than 99%.
3, after coating pretreatment, one-time construction, without
bottom coating, can get enough thickness of coating, easy to
realize automation, high production efficiency, reduces the cost.
4. The coating is compact, adhesion, resistant to impact strength
and tenacity, high Angle coverage, excellent resistance to chemical
corrosion and electrical insulation.
5. Powder coating storage, transportation safety and convenience.